IP명 | 60 GHz Dual-polarization MIMO Receiver with Crosspolarization Canceller in 65-nm CMOS | ||
---|---|---|---|
Category | Analog | Application | 5G Millimeter-wave IC |
실설계면적 | 4㎛ X 3㎛ | 공급 전압 | 1V |
IP유형 | Hard IP | 동작속도 | 60GHz |
검증단계 | Silicon | 참여공정 | HM-2402 |
IP개요 | Abstract - In this paper, 60 GHz dual-polarization MIMO receiver in a 65-nm CMOS process are explained. Dual-polarization transmission utilizes orthogonal polarization modes to support simultaneous independent data streams on each two frequency channels, which doubles the effective channel capacity. The proposed receiver uses two receive chains with a single antenna, thus achieving 2x higher communication bits/symbol than a singlechannel, single-polarization receiver. At this transmission, crosspolarization effect limits the signal-to-noise ratio of the dualpolarization transmission. To mitigate this effect, a crosspolarization canceller is presented. Also, cross-polarization canceller supports polarization control by changing phase and amplitude of each vertical- and horizontal-path. The dualpolarization canceller consists of two signal paths and two cancellation paths. Each path consists of phase shifter and variable gain amplifier. 60 GHz dual-polarization receiver with crosspolarization canceller is expected to achieve 14.08 Gb/s throughput at 10.5 pJ/bit efficiency and 16-quadrature amplitude modulation of single-carrier signaling. |
||
- 레이아웃 사진 - |